1 connectors (inlets/outlets) 6610-5 https://www.schurter.com /pg07 connectors iec appliance outlet f, snap-in mounting, front side, idc terminal, integrated light pipe, color coding arrangement "cross", white (wires cross to pin axis) arrangement "along" (wires along to pin axis) arrangement "along", grey, view from rear side (wires along to pin axis) see below: approvals and compliances f 70 c description - panel mount : snap-in version , from front side - connector , pin temperature 70 c , protection class i - wire gauge 1.5mm2/2.5mm2/14awg/12awg - light pipe guidance - light pipe as an accessory, have to be ordered seperately - live contact as pcb terminal - idc terminals acc. to iec 60998-2-3 for solid wires unique selling proposition - idc terminals for efficient wiring - design for slim light pipe guidance - light pipe for status indication, optional with 1, 2 or without light pipe quidance - v-lock cord retention characteristics - protection cover can be used as "wire press" - cross and along orientation - ideal for intelligent pdu applications - suitable for use in equipment according to iec/ul 60950 other versions on request - live contact also available as idc, solder or quick connect terminal - versions for 1 mm2 cross wire section - samples available in grey and white references alternative: version without light pipe weblinks pdf datasheet, html-datasheet, general product information, distributor- stock-check, accessories, mounting instruction, detailed request for product , microsite, landing page, video the outlet is compatible with v-lock and in the along variant also with side latch mechanisms. the v-lock connector is equipped with a notch inten - ded for use with the latching cordset. the cord latching systems prevents against accidental removal of the cordset. technical data ratings iec 10 a / 250 vac; 50 hz ratings ul/csa 15 a / 250 vac; 60 hz allowable operation tempe - rature -25 c to 70 c ip-protection from front side ip 40 acc. to iec 60529 insulation cover suitable for appliances with protection class i acc. to iec 61140 terminal idc terminals panel thickness s snap-in,0.8/1/1.5/2/2.5/3 mm (other on request) material: housing thermoplastic, black, ul 94v-0 appliance inlet/-outlet f acc. to iec 60320-3 ul 60320-1, csa c22.2 no. 60320-1 (for cold conditions) pin-temperature 70 c, 10 a, protection class i approvals and compliances detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in details about approvals approvals the approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. approval reference type: 6610-5 approval logo certificates certification body description vde approvals vde certificate number: 40035679 ul approvals ul ul file number: e103791
2 connectors (inlets/outlets) 6610-5 https://www.schurter.com /pg07 connectors product standards product standards that are referenced organization design standard description designed according to iec 60320-1 appliance couplers for household and similar general purposes designed according to iec 60320-3 appliance couplers for household and similar general purposes designed according to ul 60320-1 standard for attachment plugs and receptacles designed according to csa c22.2 no. 60320-1 general use receptacles, attachment plugs, and similar wiring devices application standards application standards where the product can be used organization design standard description designed for applications acc. iec/ul 60950 iec 60950-1 includes the basic requirements for the safety of information technologyequipment. compliances the product complies with following guide lines identification details initiator description ce declaration of conformity schurter ag the ce marking declares that the product complies with the applicable requirements laid down in the harmonisation of community legislation on its affixing in accordance with eu regulation 765/2008. rohs schurter ag eu directive rohs 2011/65/eu china rohs schurter ag the law sj / t 11363-2006 (china rohs) has been in force since 1 march 2007. it is similar to the eu directive rohs. reach schurter ag on 1 june 2007, regulation (ec) no 1907/2006 on the registration, evaluation, authorization and restriction of chemicals 1 (abbreviated as "reach") entered into force. micrositev-lock schurter ag v-lock system are based on a matching plug-dose combination. the connector is equipped with a notch intended for use with the latching cordset. the cord latching system prevents against accidental removal of the cordset. dimensions [mm] arrangement "cross" (wires cross to pin axis) 35.8 28 b a 13.5 13.5 ? 2.8 9.6 r2.5 37.1 r4 max. 24.8 +0.2 0 32.3 0.1
3 connectors (inlets/outlets) 6610-5 https://www.schurter.com /pg07 connectors version "along" (wires along to pin axis) 24.3 r4 max. 0.1 32.8 +0.2 0 37.1 35.8 28 b a 13.5 13.5 ? 2.8 9.6 r2.5 the integration of light pipes in the appliance outlet provides status indication in smart pdus. assembly instructions wire press version "cross" min. 8 1.5 4.55 0.05 2.45 0.05 9.45 0.05 3.5 6 0.10 2.8 +0.10 0 13.1 0.10 + 0.10 0 22.5 0.10 6.65 0.05 wire press version "along" 3.5 30 max. r 1 6 0.10 2.8 +0.10 0 14 0.10 0.10 + 0.10 0 min. 8 1.5 5.4 0.05 5.4 0.05 - the above mentioned dimensions are recommended when using an assembly tool. - use the cover or an assembly tool, to push the wires into the idc terminals. - the assembly force depends on the wire used and may require as much as 900 n. - press the wires into the idc terminals until the wires touch with the plastic socket of the 6610-5 when using a tool. - when using the cover be sure that it is properly mounted. - the maximum diameter of the wire (including insulation) is 3.6 mm for along, 3.5 mm for cross version. - the correct installation of the wires is essential for proper function of the 6610-5 in the end equipment. all variants alignment 1) terminal type live contact conductor cross section panel thickness s [mm] light pipe l side light pipe n side color order number along pcb terminals 1.5 mm2 / 14 awg 1.5 l l black 3-104-307 along pcb terminals 2.5 mm2 / 12 awg 1.5 l black 3-104-300 along pcb terminals 2.5 mm2 / 12 awg 1.5 l black 3-104-299 along pcb terminals 2.5 mm2 / 12 awg 1.5 l l black 3-104-298 cross pcb terminals 1.5 mm2 / 14 awg 1.5 l black 3-104-320 cross pcb terminals 1.5 mm2 / 14 awg 1.5 l l black 3-104-319 cross pcb terminals 2.5 mm2 / 12 awg 1.5 l black 3-104-312 cross pcb terminals 2.5 mm2 / 12 awg 1.5 l black 3-104-311 cross pcb terminals 2.5 mm2 / 12 awg 1.5 l l black 3-103-018 1) the alignment describes whether the wires are along or across to the connector pin axis most popular. availability for all products can be searched real-time: https://www.schurter.com/en/stock-check/stock-check-schurter
4 connectors (inlets/outlets) 6610-5 https://www.schurter.com /pg07 connectors packaging unit 100 pcs accessories description light pipe transparent plexiglas light pipe mating inlets/plugs category / description plug overview complete iec plug e, cord connector (rewireable), straight, max. cable diameter 8.5 mm 4732 iec plug e, cord connector (rewireable), straight, max. cable diameter 10 mm 4735 iec plug e, cord connector (rewireable), straight 9009 iec plug e, cord connector (rewireable), angled, max. cable diameter 8.5 mm 4733 iec plug e, cord connector (rewireable), angled, max. cable diameter 10 mm 4736 plug further types to 6610-5 ... mating inlets/plugs shuttered interconnection cord overview complete vac13ks, interconnection, v-lock cord retaining, 0.6 m, connector iec c13, h05vv-f3g0.75 / svt 3x18 awg, black 3-100-354 vac13ks, interconnection, v-lock cord retaining, 1.2 m, connector iec c13, h05vv-f3g0.75 / svt 3x18 awg, black 3-100-355 vac13ks, interconnection, v-lock cord retaining, 1.5 m, connector iec c13, h05vv-f3g0.75 / svt 3x18 awg, black 3-100-356 vac13ks, interconnection, v-lock cord retaining, 3.0 m, connector iec c13, svt 3x18 awg, black 3-100-361 vac13ks, interconnection, v-lock cord retaining, 1.8 m, connector iec c13, h05vv-f3g0.75 / svt 3x18 awg, black 3-100-734 interconnection cord further types to 6610-5 ... the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments. information furnished is believed to be accurate and reliable. however, users should independently evaluate the suitability and test each product selected for their own applications. 27.02.2018
|
